Page 14
New iStar ICCD
2. To remove dirt or fingerprints on the input window of the image intensifier, please contact your local Andor
representative for advice on how to best clean this interface.
3. Turning off the New iStar camera through mains or camera On/Off switch during acquistion or cooling may
result in damage to the camera. When possible, ensure sensor cooling temperature should be > 0
o
C (after
switching Off the cooler) before turning off the camera.
4. Prior to mounting the camera on an optical system, the black grommet which covers the image intensifier and
protects it from unwanted photo-bleaching must be carefully removed without the use of any tools such as
screwdrivers.
saFety symbols
The following are explanations of the safety symbols found on this product:
Caution, potential hazard
Caution, risk of electric shock
This product has been tested to the requirements of CAN/CSA-C22.2
No. 61010-1, 2
nd
edition, including Amendment 1, or a later version of the same standard incorporating the same level of
testing requirements.
ReGUlatoRy ComPlIaNCe
Please refer to the Declaration of Conformity in Section A1 of this User Guide.
Safety and Warnings Information
