manualshive.com logo in svg

Andor Technology New iStar, User Manual

Share
Download
Andor Technology New iStar User Manual Download Page 155

Page 155

New iStar ICCD

Appendix

a4 -  tHe Waste eleCtRoNIC aND eleCtRICal eQUIPmeNt  

 

 

       ReGUlatIoNs 2006 (Weee)

Where appropriate, Andor has labelled its electronic products with the WEEE label (crossed out wheelie bin) to alert our 
customers that products bearing this label should not be disposed of in a landfill or with municipal waste. If you have 
purchased Andor-branded electrical or electronic products in the EU after August 13, 2005, and are intending to discard 
these products at the end of their useful life, Andor are happy to assist. 

The cost for the collection, treatment, recycling, recovery and sound environmental disposal of these goods at the end of 
its useful life has not been included in the price. If you require help/assistance regarding the disposal of this equipment 
please refer to our website, or contact our sales team at which point instructions and a quotation can be provided. 

A copy of the Company’s WEEE Policy can be viewed at the Company website

 

andor.com

.

TERMS AND CONDITIONS OF SALE

The terms and conditions of sale, including warranty conditions, will have been made available during the ordering 

process. The current version may be viewed at:

andor.com/contact_us/support_request/warranty/standard_warranty.pdf

 

 

WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)

The company’s statement on the disposal of WEEE can be found in the Terms and Conditions.

Summary of Contents for New iStar




























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands