Transport and storage
72
Edition 05/2014
PlasmaQuant PQ 9000
11. Switch on the PlasmaQuant PQ 9000 and start ASpect PQ.
10.4
Installing the recirculating chiller
CAUTION
Observe the operating manual of the recirculating chiller!
1. Connect the PlasmaQuant PQ 9000 and the recirculating chiller with the cooling water
hoses:
Mobile cooling unit "Outlet"
PlasmaQuant PQ 9000 "In"
Mobile cooling unit "Inlet"
PlasmaQuant PQ 9000 "Out"
Note:
For better allocation of the connections, one of the hoses is marked with hose clips at both
ends.
2. Electrically connect the recirculating chiller and switch it on.
3. Prepare the cooling water (see the section "Changing the cooling water" p. 61).
4. Start ASpect PQ and open the wizard for changing the cooling water.
5. Switch on the PlasmaQuant PQ 9000.
6. Fill cooling water with the assistance of the wizard. Skip item (2) "Draining the cooling
water" in the wizard.
7. Set the following parameters at the recirculating chiller:
Temperature:
18°C
Pressure:
53 psi
