56
www.analogway.com
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
5.
Click
Go
at the bottom of the Playback area to run the playback. Select a cue and click
Go
to skip to
a specific cue.
6.
Enter timings for the cues in the
Wait
,
Fade
and
Hold
columns.
7.
Click
Rls
to release the cue stack from the playback. This only removes the cues from playback, not
from the cue stack list or the cue list.
Note: If a show is exported with cue stacks in one of the Playback areas, rebooting the server will automatically start playing the cues in
the stack.
9.5
Example Show
Let us create a simple show in which one media layer is playing in the background and another layer is on top
of it with a logo (still image) on it. Using cues, the logo will move from the left side of the projection area to
the right side.
To achieve this, do the following:
1.
Open the
Cues
panel and make sur
Recording…
is enabled.
2.
Go to
Layers
, select a background media and play it on Layer 1 (a green border appears around these
controls).
3.
In
Cues
, click
Save new
to create a cue with the recorded media state. A new cue appears in the Cue
list.
4.
In
Layers
, select the logo image in the Media selection panel of Layer 2, play it and use the position
controls to place it on the left side of the composition.
5.
Make sure that media selection, play mode and position control adjustments are recorded on the
Programmer.
6.
In
Cues
, click
Save new
to create a new cue.
7.
In
Layer 2
, use the position controls to move the logo to the right side of the composition.
8.
In
Cues
, click
Save new
to save the position change to a new cue.
Three cues are created in the Cue List: a background media without logo, the background media with the
logo on the left and the background media with the logo on the right.
9.
Click
S-add
to create a new cue stack in the Cue stack list. Select the cues and drag them into this
stack.
10.
Drag the stack into Playback 1.
11.
Select the first cue in the Playback list and click
Go
.
o
Enter timings for each cue (
Wait
,
Fade
and
Hold
).
o
Right-click a cue to change its trigger type (
Manual
or
Automatic
).
o
In
Manual
mode, keep clicking
Go
to go through the three cues of the Playback.
9.6
Live show recommendations
Here a few tips and recommendations for live show setup:
-
Create a "Stop cue" and put it at the end of each cue stack.
-
Use separate playbacks to play different sequences of media on different displays.
-
Set the User Interface so that the
Cues
,
Layers
, and
Performance
panels are visible.
-
When live, use the
Layers
panel only for adjusting minor things such as audio volume.
-
Hide the
Displays
,
GPU
and other tabs that do not directly affect the show.
-
Set hotkeys on the keyboard to play specific Playbacks (Edit > Options > Keymap), by default
F9
,
F10
and
F11
play Playback 1, 2 and 3 respectively.
