Analog way Picturall MSP16-R1, User Manual

Page: 17 / 86

17
www.analogway.com
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
Universe DMX Layer Universe DMX Layer
1
1 Layer 1
3
1 Layer 19
57 Layer 2 57 Layer 20
113 Layer 3 113 Layer 21
168 Layer 4 168 Layer 22
225 Layer 5 225 Layer 23
281 Layer 6 281 Layer 24
337 Layer 7 337 Layer 25
393 Layer 8 393 Layer 26
449 Layer 9 449 Layer 27
2
1 Layer 10
4
1 Layer 28
57 Layer 11 57 Layer 29
113 Layer 12 113 Layer 30
168 Layer 13 168 Layer 31
225 Layer 14 225 Layer 32
281 Layer 15 281 Master Block
337 Layer 16
393 Layer 17
449 Layer 18
Table 3 - Example patch of 32 layers using 56ch DMX profile
4.1.5 Network configuration
Fig. 10 - Network configuration
There are three ways to set the IP addresses for the server.
- Automatic (DHCP): The server gets IP address from DHCP server in the same network
- Automatic (ARTNET): The IP address is generated based on the Art-Net protocol
- Manual: Set the IP address and netmask manually
Caution: Never have two DHCP servers in the same network.
Caution: Set the IP address manually if Automatic (DHCP) is activated in the server.