Source Controls
12
Mi-Control Mi-Series Configuration Software
Using On-Board Sirius Satellite Source Controls
The Audio Source Controls enable you to control an internal Mi-Series Sirius source. You can select a
specific channel or select a category and then select the channel. After selecting a Sirius channel, the
audio plays in the selected room.
FIG. 7
On-Board Sirius Source Control
1.
Click the room.
2.
Click the
Sirius
source tab.
3.
Click the
UP/DOWN
button to access the next/previous Channel.
4.
To advance through the System presets, click the
RIGHT / LEFT
button.
5.
The
ROUND
button is not used.
6.
Click the
Category
buttons to switch between next and previous Category
Setting Direct Access to a Specific Channel or Category
1.
To select a specific channel, key in the channel number and click Enter (Ex. 6Enter = Channel 6).
2.
To select a specific category, key in the category number, plus dot, plus 0, and click Enter. This will
select the category and the first channel within that category. (Ex. 1.0Enter = 1st channel in
Category 1).
If you select a channel or category number but do not click the Enter button, the
Sirius source will remain on the current channel.
Summary of Contents for DAS-MI-0404
