Source Controls
14
Mi-Control Mi-Series Configuration Software
Using CD Source Controls
The Audio Source Controls enable you to control a CD Player source to select a specific CD and track.
After selecting a CD and track, the audio plays in the selected room.
FIG. 9
CD Source Control
1.
Click the room.
2.
Click the
CD Player
source tab.
3.
Click the
UP / DOWN
button to access the next/previous Track.
4.
Click the
LEFT / RIGHT
button to access the next/previous CD.
5.
The
ROUND
button may/may not be defined, check with your installer.
6.
The
SQUARE
button may/may not be defined, check with your installer.
Setting Direct Access to a Specific DISC or TRACK
1.
To select a specific CD and track, using the number buttons, key in the CD #, press the DOT button,
key in the track # and press ENTER (Ex. 25.4Enter = CD 25, Track 4).
2.
To select a specific Track on the current CD, key in the Track # and press ENTER (Ex.4Enter =
Current CD, Track 4)
If a CD and track number are selected and the Enter button is not clicked, the CD
player will remain on the current CD and track.
All source control buttons are defined at the Mi-Series Controller at the time of
installation and may perform differently than described below. Please verify the
functionality of the source control buttons with your Installer.
The
ROUND
and
SQUARE
source control buttons may or may not be defined.
Please check with your installer.
Summary of Contents for DAS-MI-0404
