Overview
3
Mi-Control Mi-Series Configuration Software
Searching for Available Controllers
Searching locates Mi-Series controllers that connected to the network after you opened Mi-Control.
FIG. 1
Controller Selection Window
1.
To locate connected controllers, on the Controller Selection window, click
Search
. Connected
controllers display in the Available Controllers list.
Controller Network Status
The Mi-Control Controller Selection window displays the IP Address and the current network status of
controllers. The table below shows the possible status values.
Controller Network Status
Status
Description
Failed
The controller has stopped communicating. If this happens, check that your computer's
network connection is working, and that the controller is powered on and properly
connected to the network.
Handshaking
Mi-Control is negotiating a connection with the controller.
Connected
Mi-Control has established a connection with the controller.
A controller can only be used when its status is
Connected
. Otherwise, the Select
button will be disabled.
Summary of Contents for DAS-MI-0404
