Working with Room Settings
26
Mi-Control Mi-Series Configuration Software
Clearing a Favorite Source
1.
In the Favorite Source area on the Room Settings window, deselect the
Automatically play favorite
when Room
is selected
check box.
2.
Click
OK
.
Room Favorites
Room Favorites are favorite stations, channels, CDs, etc. that can be set for each source, per room.
When that source is turned on for that room (and there is a favorite set), the favorite begins playing in
that zone automatically.
Example:
If you like to listen to the Radio set to 104.5 FM while you're getting ready in the morning,
you could set 104.5 FM as the favorite for your bedroom. In the morning, if you're the first person to
turn on the radio from your bedroom, it will begin playing 104.5 FM.
Setting a Room Favorite
1.
In the Room Favorites area on the Room Settings window, double-click an entry in the Favorite
Station / Track / CD /Channel column.
2.
Enter the room favorite for that source. See the
Summary of Direct Access for Audio Sources
section
on page 19 for the format to which the favorite should conform.
3.
Press the
Enter
key.
4.
Click OK.
Clearing a Room Favorite
1.
In the Room Favorites area on the Room Settings window, double-click an entry in the Favorite
Station / Track / CD /Channel column.
2.
Press the
Delete
key to delete the contents of the favorite.
3.
Press the
Enter
key.
4.
Click OK.
Room Alarm
A separate alarm can be set for each room. If enabled, the alarm occurs every day at the specified time
and turns on the selected source. The volume increases slowly to the set volume. The alarm
configuration is saved on the Mi-Series controller itself, so it is not necessary for Mi-Control to be
running for the alarm to operate.
Setting a Room Alarm
1.
In the Room Alarm area on the Room Settings window, select the
Enabled
check box.
2.
Select the source to play from the Source drop down list.
3.
Select the volume to play by moving the Volume slider.
4.
Enter the time to sound the alarm in the Time box.
5.
Click
OK
.
The favorite only takes effect if the source was not already playing, and the source
has been powered OFF.
Summary of Contents for DAS-MI-0404
