Source Controls
13
Mi-Control Mi-Series Configuration Software
Using External Tuner Source Controls
The Audio Source Controls enable you to control an external AM/FM Tuner source to select a specific
radio station. After selecting a radio station, the audio plays in the selected room.
FIG. 8
External Tuner Source Control
1.
Click the room.
2.
Click the
Tuner
source tab.
3.
Click the
UP / DOWN
button to SEEK UP/DOWN
4.
The
LEFT / RIGHT
buttons are not used by an external Tuner source
5.
Click the
ROUND
button to toggle between AM and FM
6.
Click the
SQUARE
button to toggle between MONO and STEREO mode
Setting Direct Access to a Specific Station
1.
1.To select a specific station, click the station's frequency number buttons (including the decimal
place for FM stations), and then click
Enter
.
If you select a frequency number but do not click the Enter button, the tuner will
remain on the current station.
All source control buttons are defined at the Mi-Series Controller at the time of
installation and may perform differently than described below. Please verify the
functionality of the source control buttons with your Installer.
The
ROUND
and
SQUARE
source control buttons may or may not be defined.
Please check with your installer.
Summary of Contents for DAS-MI-0404
