Source Controls
15
Mi-Control Mi-Series Configuration Software
Using DVD Source Controls
The Audio Source Controls enable you to control a DVD Player source to select a specific DVD and
track. After selecting a DVD and track, the audio plays in the selected room.
FIG. 10
DVD Source Control
1.
Click the room.
2.
Click the
DVD Player
source tab.
3.
Click the
UP / DOWN
button to navigate selections while in the DVD Menu.
4.
Click the
LEFT / RIGHT
button to navigate selections while in the DVD Menu or to select next
scene/track, etc.
5.
Click the
ROUND
button to make a selection.
6.
Click the
SQUARE
button to access the MENU.
Setting Direct Access on a DVD
1.
To select a specific Track on a DVD, key in the Track # and press
ENTER
(Ex.4Enter = Track 4)
If you select a DVD and track number but do not click the Enter button, the DVD
player will remain on the current DVD and track.
All source control buttons are defined at the Mi-Series Controller at the time of
installation and may perform differently than described below. Please verify the
functionality of the source control buttons with your Installer.
The
ROUND
and
SQUARE
source control buttons may or may not be defined.
Please check with your installer.
Summary of Contents for DAS-MI-0404
