Source Controls
16
Mi-Control Mi-Series Configuration Software
Using External Satellite Source Controls
The Audio Source Controls enable you to control a Satellite source to select a specific satellite channel
or category. After selecting a channel, the audio plays in the selected room.
FIG. 11
External Satellite Source Control
1.
Click the room.
2.
Click the
Satellite
source tab.
3.
Click the
UP / DOWN
button to access the next/previous Channel
4.
Click the
LEFT / RIGHT
button to move up/down within the Guide.
5.
Click the
ROUND
button to make a selection
6.
Click the
SQUARE
button to access the MENU.
Setting Direct Access to a Specific Channel
1.
To select a specific channel, key in the channel number and click
Enter
(Ex. 6Enter = Channel 6).
All source control buttons are defined at the Mi-Series Controller at the time of
installation and may perform differently than described below. Please verify the
functionality of the source control buttons with your Installer.
The
ROUND
and
SQUARE
source control buttons may or may not be defined.
Please check with your installer.
Summary of Contents for DAS-MI-0404
