AMS SENSIT 3 GLASS FRONT VENDOR
L0086, Rev. G
6-9
door is closed. When the door is closed, the lights
will turn off.
Lighting does not affect the merchandiser
display.
6.15.8 BRIGHTNESS
The optional fluorescent lamps are not
dimmable. They are either on or off.
The optional LED lamps are dimmable. To
use the LED dimming feature the merchandiser
must be equipped with S3, have a 20158L
harness and have LED lamps installed.
In Service Mode, scroll to EnergySensit,
then select option 8 for Brightness. Use the
keypad 1 and 2 buttons to change the default
brightness as shown on the display. Press the *
key to save the new default setting. The default
will operate when the merchandiser door is closed.
The factory default is 100%.
During the time the door is open the LED
lamps will change to 90% regardless of any
settings.
If the EnergySensit lighting feature is turned
on, and the software determines the lights should
turn off, the LED lamps will automatically dim to a
minimum of 10%. If the keypad is used or credit
activity is detected, the lights will brighten to the
default setting for three minutes.
Brightness does not affect the
merchandiser display.
Summary of Contents for Sensit 3 39 VRM
