L0086, Rev. H
AMS SENSIT 3 GLASS FRONT VRM
5-4
5.16.2 Tray Adjustment And Loading
As delivered from the factory there are two wide
columns for products such as Life Savers, and two narrow
columns for products such as gum or Certs. However, the
tray may be reconfigured to fit the product being vended
by adjusting the position of the column dividers (Refer to
Figure 5.4). The dividers, being adjustable, change the
column width. Adjust the divider position by removing the
screw at the rear of the divider. Pull on the divider towards
the front of the tray to loosen it. Reposition the divider by
inserting the mounting tabs into the appropriate slots.
Push the divider down and to the rear to tighten it into
place. Reinstall the screw at the rear of the divider. Test
the column for proper vending.
Figure 5.4 1.5” Helix Tray
Summary of Contents for Sensit 3 39 VRM
