AS7030B/AS7038GB/AS7038RB
Introduction
Eval Kit Manual
• PUBLIC
UG001014
• v1-00 • 2021-May-06
53
│ 3
1
Introduction
The AS7030B/AS7038GB/AS7038RB Evaluation Kit allows evaluation of all functions on the
AS7030B/AS7038GB/AS7038RB Biosensor and test them in various applications.
The initial Evaluation Kit works with USB connection to the PC and comes with a GUI, which enables
the user to change AS7030B/AS7038GB/AS7038RB register settings, see measurement results and
many more.
The Windows GUI software is part of the kit and currently shows the raw data from FIFO with AGC
(Automatic Gain Control) features only. The Evaluation kit also contains firmware. New versions of the
firmware can be flashed onto the ARGON wireless module with an nRF52480 MCU.
1.1
Kit Content
Figure 1:
Evaluation Hardware Board
For full flexibility, the PCB of the evaluation kit has two parts: a controller boards and sensor board
(submodule or SMOD). The controller board has an accelerometer, three electrodes located and a
connector to interface with the submodule located on the breakout board. The break out part can be
re-connected to the Microcontroller part via an FPC cable if it is broken off.
AS7030B/AS7038GB/AS7038RB SMOD sensor board should be connected for the application
