6.1.6 IP Phone Firmware
The
IP Phone Firmware Management
page is for uploading firmware of IP phone. When connecting
an IP phone to PBX, the IP phone can automatically upgrade to the latest firmware once there is a
version available for download on the IP PBX. Select
Device
->
IP Phone
Firmware
to add, edit, or
delete IP phone firmware configurations.
6.1.6.1 Add IP Phone Firmware
1.
Enter settings shown in Table 6 -24.
2.
Click
Put File
to see the newly added firmware in the table below.
Note:
The uploaded file and auto generated file will be displayed at the TFTP Service page under root
directory.
6.1.6.2 Delete IP Phone Firmware
1.
Select a vendor prefix of IP phone.
2.
Click
Del
at the top-left side of the table to remove the firmware.
Note:
The deleted file and originally auto generated file will be also deleted from the TFTP Service
page under root directory.
Table 6-24 IP Phone Firmware Configuration Settings
Field
Description
Vendor Prefix
Ask your IP phone vendor for the prefix. e.g. eip7012.
Version
Enter the firmware version that is going to be upgraded
for the IP phone, e.g. 1.0.0123
Firmware File To Upload
Click Browse to find a firmware file from the local host.
1.29 Call Route
6.1.7 Route Management
A route is a destination number pattern for outbound call matching. A pattern consists of digits 0-9
(including “-”), “*”, “#”, digit set, and wildcard characters like “.”, “X”, “Z”, and “N”. Table 6 -25 explains
digit set and wildcard characters.
Note:
The “#” in route pattern is for some PSTN saver lines that may set “#” as their dial pattern. For
most of the IP Phones, press “#” will immediately send out the dialed number.
67
