History
Display the commands you entered before. You can also press
↑
↓
on the keypad to show the used
commands.
CLI Command:
history
Enable
Enter the admin level. The system will request for a password. The password is the same as the
administrator’s password for web interface. Admin level allows to enter Admin and PBX Commands.
CLI Command:
enable
Note:
The message “Someone login. Press ‘y’ to login anyway, or any other key to quit” will show up if
there is an old web GUI session existing.
9.1.2.4 Admin Commands
This section is for the system administrator and requires password to use these commands. For
commands in admin, the administrator can start, stop and restart system services, debug SIP, and
shutdown or reboot the PBX system.
1.
Enter
enable
, and then admin’s password to log in as a system administrator.
2.
Enter
admin terminal
to start using the admin commands.
Help
Display the help message command available for the level.
CLI Command:
help / ?
Display the available commands after the commands you entered
CLI Command:
<CLI command>
?
Quit / Logout
Enter the command to Logout CLI.
CLI Command:
quit / logout
Exit
Exit the current level and go back to the previous level. If you are in the basic level, the console
117
