Usergroup
When disabled DID, click a usergroup in the list whose
reachability to other usergroups and trunks will be
used as the privilege of inbound calls from this trunk.
There may not be appropriate usergroups to select
initially. One can come back later once the
expected usergroup has been added.
Disable Fast Bridging
Select to disable express media forwarding.
With Fast Bridging feature enabled, if the two
parties involved in a call (for example, one IP
extension and one SIP trunk) use different DTMF
modes (RFC2833/SIP INFO/Inband), inline transfer
(*#) or 2nd-dialing might fail. To avoid such
problem, it is recommended to set the same
DTMF mode for all IP extensions and SIP trunks in
the IPBX, as well as for all IP phones registered to
the IPBX. If it is not feasible to set the same
DTMF mode for some IP extensions or SIP trunks,
and inline transfer or 2nd-dialing is necessary for
those IP extensions or SIP trunks, the Fast
Bridging feature can be disabled on a per IP
extension and per SIP trunk basis. Note that Fast
Bridging is enabled by default.
2.5.2
Add Analog PSTN Trunks
1.
Enter settings shown in Table 3 -9.
2.
Click
Add
to see the newly added analog PSTN trunk in the table in the webpage.
For deleting an analog PSTN trunk, select a trunk identifier and click
Del
.
Click
Next
to assign trunks to usergroups.
Table 3-9 Add Analog PSTN Trunk Settings
Field
Description
Trunk Group
ID number of this PSTN trunk group. A valid number
9
Please refer to 1.27 for details.
19
