Device
Select LAN/WAN interface of the application to which
the rule is applied.
Protocol
Select TCP, UDP, ICMP or ALL to which the rule will be
applied.
Source/Port Range
Enter the IP address and port/port range of source side.
Rule matches can also be inverted by selecting the
Invert option.
Destination/Port Range
Enter the IP address and port/port range of destination
side.
Rule matches can also be inverted by selecting the
Invert option.
Action
Select ACCEPT or DROP.
Say, the configuration of Rule ID 1 as below:
IP PBX will accept all LAN connections within IP address 192.168.1.0/24 and port range 5060-5080
and to the destination IP address and port (192.168.1.30:5060).
1.16 Maintenance
This page includes maintenance functions of IP PBX, including
Storage Backup
,
System Alert
,
SIP
UA
,
CDR Log, System Log
and
Active Calls
.
4.1.20Storage Backup
To back up internal main storage, the administrator can back up the internal main storage to USB
Mass storage or NFS server. You can select to keep or remove
CDR
and/or voicemails after backup.
4.1.20.1Back up to USB Mass Storage
Click
USB Mass Storage
, and then
Backup
to follow the instructions to insert the USB connector of
an external USB drive. After a confirmation of the insertion, backup starts a few seconds later if the
external USB drive is accessible and has enough free space. If the backup is successful, a new folder
(yyyy-mm-dd-hhmmss, eg. 2007-06-26-151100) will be created in ippbx-backup folder on the external
drive. After the backup, remove the USB connector of the external drive.
4.1.20.2Back up to NFS Server
1.
Click
NFS Server
.
2.
Enter a URL path in
NFS Directory Path
.
33
