4.1.25Active Calls
The
Active Calls
page shows current active calls. The auto-refresh feature makes the browser
refresh its contents at specified intervals. Select to enable auto-refresh this page and set the interval
in seconds (10 - 60 seconds). Enter the specified number of minutes (1-9999 minutes) in the text field
and enable
Only display calls
function for displaying the specified active calls list. Columns Client
and Party indicate the involved extensions or trunks of a call. State shows the state of a call, while
Service gives the current action of the listed Client.
Table 4-16 The State of Active Calls
Field
Description
Caller
Show the caller’s extension number, port number, or SIP trunk ID.
Caller state
Dial
The client is caller.
IVR
Calls from FXO are picked up by Auto-Attendant.
Pause
The client is being paused for some time.
Prompt
The client is being prompted for a pre-recorded audio.
Voicemail
The client enters voicemail service.
Meet-me
The client enters meet-me service.
Paging
The client enters paging service.
Busy Call-back
The client enters busy call-back service.
ACD
The client enters ACD service.
Trunk
Shows trunk ID that is using in this call.
Callee state
Answer
The client is callee.
Callee
Show the callee’s extension number, port number, or SIP trunk ID.
Answer Time
Show the answer time of active calls.
Duration
The field shows how long the call has been connected. Press
to disconnect right away.
1.17 Firmware Upgrade
The version of the running PBX firmware could be found in
System
->
Firmware Upgrade
. To
upgrade current firmware, click
Browse
to locate a release file obtained from the vendor, and click
Upgrade
to have the latest version of PBX firmware.
Note:
(1) Consult with your IP PBX service provider for upgrade procedure.
38
