7. Console port
Connect to a PC through console mode.
Installation Overview for PC#2
1. AC Power
100-240 V, 50-60 Hz
Warning:
Make sure the AC power is within this range, and the system is properly
shut down before AC power is disconnected. Power outage or sudden power off
will cause severe damage to the system and may not be recoverable.
2. Pots port
Usually 4 ports per box, numbered from left to the right. FXO ports
are to be connected to FXS jacks on wall or analog PBX using RJ-
11 cables. FXS ports are to be connected to analog phones, fax
machines, or FXO ports of other devices. ISDN BRI TE ports are
to be connected to NT points from PSTN or other ISDN network-
side devices.
3. USB port
1 external port with compliance to USB 1.1/2.0. Plug in a USB
hard drive for CDR (Call Detail Record) /voicemail backup from
the internal storage.
4
