4 System Configuration
This section describes how to configure system parameters used by IP PBX. Click
Customize Setup
after login the web interface to configure the following system parameters.
1.7 PBX System
The
PBX Status Management
page briefs Product Name, Firmware Versions, WAN/LAN Status,
CPU Usage, Memory Usage, Hard Disk Usage and System Runtime. The WAN/LAN status includes
Internet Connection status, Interface MAC, IP Address, Netmask, Default Gateway and IP packets
static information. The auto-refresh makes the browser refresh its contents at specified interval. Select
to enable auto-refresh this page and set the interval in seconds (Range: 10-60 seconds).
1.8 Time
The
Time Setup Management
page allows administrator to configure time zone and date for IP PBX.
With correct time setup, functions such as IVR, worktime, and voicemail can present the actions at the
right time. Select
System
->
Time
to see the current setting of time zone and date.
4.1.1 System Time Zone
1.
Click a region/country in the
Time Zone
list.
2.
Click
Apply
in
System Timezone Setup
.
3.
Go to
System
->
Shutdown
, select
Rebooting After Shutdown
and Click
Yes
to activate
changes.
4.1.2 Real Time Clock (RTC) Setup
1.
Click year, month, day, hour, minute, and second in the correspondent list.
2.
Click
Apply
in
Real Time Clock Setup
.
Note:
When reset the time 15 minutes later than the time showed in RTC Setup, the system will ask
for re-login.
1.9 WAN
The
WAN Setup Management
page allows administrator to configure WAN network interface for IP
26
