Inserting the Temperature-Sensitive Paper
Only the temperature-sensitive paper that is specified for this printer must be
used to ensure high quality printing and safe operation.
To remove the cover, pressure must be applied to the grooved surfaces on
both sides and the cover must be pulled upwards. The temperature-sensitive
paper must be cut straight before insertion. It must then be pushed into the slot
at the front side of the paper compartment and the paper feed key must be
pressed until the paper is coming out from the print head.
To protect the paper roll from falling out and from contamination, the cover
must be mounted and locked by pressing on the side surfaces.
A red stripe will appear on the paper to indicate that the paper is running out.
The paper should then be pulled out and be replaced by a new roll.
8.4 Lists of Measured Values
As described in chapter 7, when the output channel has been set to ´
U
´ or ´
P
´
(see 7.2.2), the measured values will, at all measuring point scans (see 7.2
and 7.3) and memory outputs (see 7.4.2), be provided as a list of measured
values, including the time of day, to the interface or the built-in printer (option).
The output of the lists of measured values can be provided with three different
formats: the measured values with range and comment in a list, in columns or
in spreadsheet (table) format (see 7.2.2 and manual 6.6.1).
8.5 Manual Data Output
Besides the lists of measured values all other measuring and programming
values can also be provided. For the output of data to the interface or to a
built-in printer the output channel must be set to ´U´ or ´P´ by using the key
within the function OUTPUT CYCLE (see 7.2.2). The output format is of no
importance for the manual data output. All function values that have been
selected by using the rotary switch and, possibly, with the key
FUNCTION
, can
then be printed out with the following printout by using the key
:
ALL
... manual data output:
FUNCTION
Key
Function
Printout
MEAS. VALUE
12:34:00 01: +0023.5 °C
MAX.VALUE
MAXIMUM:
01: +0020.0 °C
F
Ana-Start
ANALOG START 01: +0000.0 °C
MIN.VALUE
MINIMUM:
01: -0010.0 °C
F
Ana-Stop
ANALOG END:
01: +0100.0 °C
AVG.VALUE
AVERAGE VAL: 01: +0017.8 °C
ALMEMO
®
5590-2
46
Digital Data Output
Summary of Contents for Almemo 5590-2 V5
Page 54: ...53 ALMEMO 5590 2 Appendix...
Page 55: ...ALMEMO 5590 2 54 Notes...
Page 56: ...55 ALMEMO 5590 2 Notes...
