7.3.6 Start and Stop by Limit Values
Another possibility for starting or stopping a data logging automatically is the
triggering by the exceeding of limit values (see manual 6.6.3). The
allocation
of the start or stop command
to a limit value can be performed in switch
position LV:MAX or LV:MIN. The additional function
Action max
or
Action min
can be activated with using the key
FUNCTION
.
Function ACTION MAX and ACTION MIN:
LV:MAX
action cleared:
01:Action max - - -
The
activation of the actions ´Start´ or ´Stop´
is performed by pressing the
key ENTER and selecting with the keys and .
The symbols ´
Start
´ or ´
Stop
´ will start flashing.
The programming can be terminated by the key
ENTER
.
Action START at LV:MAX of channel 1:
01:Action max Start
7.3.7 Averaging
The
average value
of the measured value is required for various applications:
e.g.
- smoothing of a largely varying measured value (wind, pressure etc.)
- hourly or daily average values of weather data (temp., wind etc.)
- as above, of consumption values (current, water, gas etc.)
An averaging process for the measured values of measuring point scans can
be programmed for each measuring point (manual 6.7.4).
The
average value
can be
indicated and programmed
at switch setting
AVG:VALUE.
Function AVG.VALUE:
AVG.VALUE
01:Avg.value: 173.5°C
Average values must be cleared before each measurement and for
programming. The
clearing of an average value
is performed after selecting
the input channel by using the key
CLEAR
or by a total clearing (see 7.).
The
type of averaging
is determined through the averaging mode:
39
ALMEMO
®
5590-2
Cyclic Measuring Point Scan
Summary of Contents for Almemo 5590-2 V5
Page 54: ...53 ALMEMO 5590 2 Appendix...
Page 55: ...ALMEMO 5590 2 54 Notes...
Page 56: ...55 ALMEMO 5590 2 Notes...