6.8 Locking the Programming of the Sensor
(s.man. 6.3.12)
The function parameters of each measuring point are protected by the locking
mode up to an adjustable locking level. Before any programming is performed
the locking mode must be correspondingly lowered. If a dot is indicated
following the locking mode on the display then a modification is not possible.
Locking Level
Locked Functions
0
none
1
measuring range + element flags
2
measuring range + zero point and slope correction
3
measuring range + dimension
4
+ zero point and slope correction
5
+ base value, factor, exponent
6
+ analogue output, start and end
7
+ limit values, max and min
Function LOCKING MODE:
RANGE
key:
FUNCTION
01:Locking: 0005
Programming
Input according to 5.4
If programmed, the element flags and the multiplexer settings are indicated on
the display next to the locking mode (see manual 6.10.2/3).
The keyboard locking by means of the key switch must be used to protect the
programming and the process control during a measurement against
unauthorised modification (see 5.4).
6.9 Copying Measuring Points (with MU connector only)
At the plug-in modules ES 5590-MU the sensor programming for all 10 sensors
is stored in an EEPROM of the 10-fold socket ZA 5590-MU. At these
measuring points all programmed values of one measuring point xx can be
transferred to another measuring point yy, as follows.
1. Program the measuring point xx
2. Turn the rotary switch (5) to the position
RANGE
.
3. Select the input channel yy by using the keys
CHANNEL
,
y
,
y
4. Press the key
COPY
.
ALMEMO
®
5590-2
30
Sensor Programming
Summary of Contents for Almemo 5590-2 V5
Page 54: ...53 ALMEMO 5590 2 Appendix...
Page 55: ...ALMEMO 5590 2 54 Notes...
Page 56: ...55 ALMEMO 5590 2 Notes...
