Ammann AV23-2 Manual Download Page 90

Page: 90 / 180

7 Options

BNNbOO

ID: 1138310

Issue date January 01, 2010

Anti-adhesive

Position of anti-adhesive tank

The anti-adhesive tank filler neck

(1)

is located below the hood at the right
of the roller.

Anti-adhesive reservoir volume: 14 l

Activating anti-adhesive

If the roller is equipped with the anti-
adhesive option, you can activate
anti-adhesive with the lower button

(1)

on the operating lever.

Anti-adhesive is admixed until you
release the button.

Anti-adhesive is a water-soluble specialized liquid for combined rollers. The
anti-adhesive ensures effective separation between the pneumatic surfaces
and the bitumen course.

Advantages of anti-adhesive:

•

No tearing of the course thanks to the good separating effect.

•

Extremely low anti-adhesive consumption.

•

The course can be worked at higher temperatures.

•

Less shock to the hot course due to lower water consumption.

•

Anti-adhesive does not corrode the pneumatic tire rubber.

•

Penetration of superfluous anti-adhesive has no subsequent negative

effects.

•

The anti-adhesive is biodegradable.

Summary of Contents for AV23-2





















































































































































































Search results

Summary of Contents for AV23-2

Reviews:

Related manuals for AV23-2

Brands by name

Popular brands

Ammann AV23-2, Manual

Search results

Summary of Contents for AV23-2

Reviews:

Related manuals for AV23-2

Brands by name

Popular brands