Ammann AV23-2 Manual Download Page 131

Page: 131 / 180

8 Maintenance

BNNbOO

ID: 1138310

Issue date January 01, 2010

127

Cleaning

Clean the main soiling from the machine after finishing work.

Regularly clean completely at least once a week. When working on cohesive
soils, or with cement and lime stabilizers, clean completely on a daily basis.

WARNING

Only clean the roller when it is static and secured against rolling.

NOTE

•

Do not use aggressive or flammable cleansing agents (e.g. gasoline or

inflammable substances).

•

Only work with the engine turned off.

•

Do not directly subject electrical components or isolating materials to a

steam jet when using a steam cleaner. Always cover these materials.

•

When washing the machine ensure that no water is sprayed into the air -

filter.

•

Before cleaning the machine with pressure cleaners using water, steam,

etc., cover all openings into which the cleaning agent may penetrate.
Remove these dummy flanges after cleaning the machine.

Summary of Contents for AV23-2





















































































































































































Search results

Summary of Contents for AV23-2

Reviews:

Related manuals for AV23-2

Brands by name

Popular brands

Ammann AV23-2, Manual

Search results

Summary of Contents for AV23-2

Reviews:

Related manuals for AV23-2

Brands by name

Popular brands