Ammann AV23-2 Manual Download Page 147

Page: 147 / 180

10 Storage

BNNbOO

ID: 1138310

Issue date January 01, 2010

143

Winterization, emptying the water tank

The purpose of winterization is to guarantee that cold air temperatures below
0° Celsius (-32 F) cannot damage the sprinkler system.

Draining the rear water tank and
the sprinkler system

Release the quick-release sprinkler
hose coupling

(1)

by pressing the

black plastic ring against the union.

Now pull the hose off the coupling.

Drain off the water.

NOTE

AV2-2: empty the front and rear
water tank.

Emptying the front water tank

Optionally, to speed up draining and
ensure that the tank is completely
emptied, you can empty the front
water tank separately.

Unscrew the quick-release sprinkler
hose clamp

(1)

by pressing the black

plastic ring against the screw
connection.

Now pull the hose off the coupling.
Drain off the water.

Summary of Contents for AV23-2





















































































































































































Search results

Summary of Contents for AV23-2

Reviews:

Related manuals for AV23-2

Brands by name

Popular brands

Ammann AV23-2, Manual

Search results

Summary of Contents for AV23-2

Reviews:

Related manuals for AV23-2

Brands by name

Popular brands