Ammann AV 70 X, Operating Manual

Page: 112 / 162

106 AV 70 X
478320
h
400111C
478320
h
400111B
1
0 I II III
416024
416024A
21
22 20 19
17
3.6. Lubrication and Maintenance Operations
3.6.10. Inspect alarm and control devices
Turn ON the ignition key into position I. •
On the LH and RH clusters the automatic control of the light- •
ing function will occur, and this through the pilot lamps go-
ing on.
Then all the pilot lamps will go off on the RH cluster, and the •
lamps on the LH cluster will remain on:
Indicator lamp for the zero position of travel controller. -
Brake alarm indicator lamp. -
Battery charge control lamp. -
Engine lubrication indicator - flickers. -
Start the engine •
The indicator lamps on LH cluster must go off: •
Battery charge control lamp. -
Engine lubrication indicator. -
Note
If the engine is not started within 10 sec. after ignition key has
bee turned ON into position I, then acoustic signal will be ena-
bled (to warn operator of the battery possibly discharged).
In addition, please test if the switches (19 - 22) and the com- •
bined switch (17) work.
Note
When lights are switched ON the luminous intensity of indicator
lamps (25) and (26) on clusters will lower.