Ammann AV 70 X, Operating Manual

Page: 116 / 162

110 AV 70 X
400178
400611A
400615
3.6. Lubrication and Maintenance Operations
Drain oil when hot – best upon operation
completion.
Use original filters only.
Use recommended oil under Section
3.2.1, only.
To not overtighten the filter, its thread
and gasket may get damaged.
Check the tightness.
Collect the oil drained, do not let oil soak
into soil.
Dispose of oil compliant to regulations.
Store used filters in a separate container
and handle them so these do not pollute
the environment.
Note
Fill up to the dipstick’s top division mark. Total sump capac- •
ity is 7 l (1,85 gal US).
When oil is exchanged, start the engine and let it run at
•
higher idle rmp for 2 - 3 min.
Stop the engine and wait for ca 3 min until oil descends into
•
the crankcase, then check the proper oil level.
3.6.13. Inspect engine cooling circuit
Check the cooling circuit tightness. Confirm no pipes are •
damaged and no clamps are missing.
3.6.12. Inspect engine induction manifold
Check the pipes and clamps. •
Do not operate the Machine if pipes and
clamps are damaged!