Ammann 6120529 Operating Manual Download

Page: 34 / 166

ARX 1

120

1281

24.

07.

2013

Location on roller:

Brake.

Danger:

Wear of the locking brake.

Explanation:

Only operate the parking brake when at a standstill. Only

operate the emergency stop when at a standstill or in an

emergency. After several operations (min. 10 operations)

of the locking brake while the roller is in motion, the brake

test must be performed.

Location on roller:

Safety belt

Danger:

Risk of accident due to the roller tipping over

Explanation:

Put on the safety belts before beginning operation of the roller.

There is an increased risk of tipping when driving in the proximity of edges (e.g. curbstone

edges, shoulders, ditches, potholes) and when driving over edges.

Location on roller:

Driver’s position.

Danger:

Damage to electrical controls!

Explanation:

Never spray a water jet into electrical or electronic

components.

Never spray into the engine combustion air intake.

Location on roller:

Driver's position and immediate vicinity of the roller.

Requirement:

Wear ear protectors!

Explanation:

Wear ear protectors in accordance with national accident

prevention regulations when working at higher noise

levels.

Warning stickers

Meaning

Summary of Contents for 6120529







































































































































































Search results

Summary of Contents for 6120529

Reviews:

Related manuals for 6120529

Brands by name

Popular brands

Ammann 6120529, Operating Manual

Search results

Summary of Contents for 6120529

Reviews:

Related manuals for 6120529

Brands by name

Popular brands