Ammann 6120529 Operating Manual Download

Page: 84 / 166

ARX 1

0128

| 28

.08

.201

DANGER

CAUTION

Installation must be carried out only by trained personnel

according to the electrical wiring diagram.

In case of a failure, contact your dealer or Ammann

Technical Support.

Turn off the battery disconnector before the installation

or maintenance.

Telematics readiness

Global positioning system with telemetry that monitors operating systems of the

machine (machine start, engine speed, fuel consumption, number of engine

hours, etc.) and its current position.

The GPS system allows the geofencing function (machine operation limited to a

defined area) and remote machine monitoring which helps finding a stolen

machine.

Note

The availability and content of the given data depends on the selected

manufacturer of the telematics system.

Telematics readiness

TrackUnit

Teltonika

FMB204

Telematic

TR001

Summary of Contents for 6120529







































































































































































Search results

Summary of Contents for 6120529

Reviews:

Related manuals for 6120529

Brands by name

Popular brands

Ammann 6120529, Operating Manual

Search results

Summary of Contents for 6120529

Reviews:

Related manuals for 6120529

Brands by name

Popular brands