Ammann 6120529 Operating Manual Download

Page: 57 / 166

Operation

120

1281

24.

07.

2013

7.2

Driver’s seat

7.2.1

Safety information

WARNING

Danger of accident due to unsecured ROPS!

The ROPS can fall as soon as it crosses its center of gravity.

• Never stand below the ROPS when lowering.

DANGER

Danger to life through distraction!

• Never adjust the driver's seat while driving, as you will loose

control of the roller.

DANGER

Danger to life through being thrown out!

• Always wear the seatbelt.

Together with the rollover bar the safety belt is a safety system

that can save your life.

DANGER

There is a risk of crushing when the roller moves out to the

sides.

• Never place your feet on the bend of the floor panel.

Summary of Contents for 6120529







































































































































































Search results

Summary of Contents for 6120529

Reviews:

Related manuals for 6120529

Brands by name

Popular brands

Ammann 6120529, Operating Manual

Search results

Summary of Contents for 6120529

Reviews:

Related manuals for 6120529

Brands by name

Popular brands