Ammann 6120529 Operating Manual Download

Page: 79 / 166

Options

120

1281

24.

07.

2013

8.13

Brake warning buzzer

The warning buzzer is active as soon as the seat contact is activated. The warning

buzzer sounds until the locking brake catches.

8.14

Battery cut-off switch

The battery cut-off switch interrupts the power supply from the battery to the roller.

Switch off the battery cut-off switch if the roller is not in operation for longer than two

days.

NOTE

Always disconnect the power supply when working on the electrical system.

8.14.1

Switching battery cut-off switch on / off

The battery cut-off switch is located at the rear on the battery plate.

Switching on
the power

Turn the red key of the battery cut-off switch left to horizontal position.

If fitted, the roller is now supplied by the starter battery.

Fig. 8-10 Switching onthe power

DANGER

Rollover hazard when driving the roller!

• Get out of the danger zone immediately!

• Personnel may not stand in front of or behind the roller while it

is in operation.

Summary of Contents for 6120529







































































































































































Search results

Summary of Contents for 6120529

Reviews:

Related manuals for 6120529

Brands by name

Popular brands

Ammann 6120529, Operating Manual

Search results

Summary of Contents for 6120529

Reviews:

Related manuals for 6120529

Brands by name

Popular brands