Amico HMF-N-70L60-UU-BE0, User Manual

Page: 32 / 44

29 Amico Accessories Inc.
Spring Adjustment (LCD Carts Only)
WARNING:
THE SWIVEL-POST INTERIOR CONTAINS SHARP EDGES. WEAR PROTECTIVE EQUIPMENT WHEN
PERFORMING THE FOLLOWING TASKS.
NOTE:
REFER TO PAGE 3 FOR SPRING WEIGHT RANGES.
WARNING:
ENSURE THAT THE MONITOR IS REMOVED AND THE VESA PLATE IS AT THE TOP POSITION PRIOR TO
BEGINNING.
1. The Gas Spring in the Swivel-Post can be replaced if the monitor weight changes, in order to maintain the
appropriate counterbalancing.
2. Remove the cap on the top of the Swivel-Post to reveal the 2 screws. Use a Philips head screwdriver (#2) to remove
the 2 screws (Figure 1) . Remove the Swivel-Post Cover.
3. Remove the Top Plate and slide out the VESA Plate to reveal the Gas Spring underneath. Replace the Gas Spring
with the new Gas Spring. Ensure that there is a hex nut on the thin side of the replacement spring and the nut is
facing up
(Figure 2)
.
4. Replace the VESA Plate, re-attach the Top Plate with the screws and replace the Top Cap and the Swivel-Post Cover.
Section 6: Adjustments
Figure 1 Figure 2
Top Cap Top Plate Screws
VESA Plate Swivel-Post
Cover
Swivel-Post
Gas Spring
Hex Nut