background image

     www.amico.com     

32

Section 6: Adjustments

Opening the Battery Compartment

Figure 1

Figure 2

Figure 3

Figure 4

1.  The Work Surface / Lockable PC Compartment ships with an envelope 

(Figure 2)

 that contains a yellow envelope. 

Within the yellow envelope, you will find a magnetic Battery Compartment Key.

2.  Use the Battery Compartment Key to unlock the Battery Compartment by placing it on the Hummingbird Logo 

Sticker on the left side of the front of the battery compartment (see Hummingbird Logo Sticker 

(Figure 3)

). 

Magnetic force will hold the key in place and keep the Battery Compartment unlocked while it remains there.

3.  With the key in place, lift the Battery Compartment Cover by pressing up on the front lip of the cover, just above 

the Hummingbird Logo Sticker 

(Figure 4)

.

4.  You can now completely remove the cover.

5.  When restoring the battery compartment cover, place the rear of the cover in first, then press the front down. 

6.  The cover will automatically lock when it is in place and the key is removed.

Hummingbird 

Logo Sticker

Battery Compartment 

Cover 

Work Surface 

Summary of Contents for HMF-N-70L60-UU-BE0













































Reviews: