15
Amico Accessories Inc.
Mounting a Keyboard and Mouse
1. Remove the backing on 3 (or half of given) dual locking pads and adhere to bottom of keyboard, spaced evenly
apart
(Figure 1)
.
2. Remove the backing on the remaining dual locking coins and attach them to those on the bottom of the keyboard
(Figure 2)
.
3. Carefully position the keyboard on the keyboard tray and firmly press down while supporting the keyboard tray
from the bottom
(Figure 3)
.
4. Place the mouse into the mouse holder
(Figure 4)
.
5. Secure the mouse and keyboard cords to the back of the keyboard tray
(Figure 5)
.
6. Route the cords through the bottom of the main bin
(Figure 6)
. Ensure that there is enough slack in the cords for
full adjustability of the keyboard tray into the progessor port (outer most position).
WARNING:
DO NOT OVERLOAD OR LEAN ON THE KEYBOARD TRAY (MAX LOAD = 10 LBS).
Section 5: Device Installation
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
(View underneath bin)
Dual Locking Coins
