17
Amico Accessories Inc.
Mounting a Laptop (Laptop Carts Only)
1. To open the Work Surface, insert the key (provided by Amico) into lock on Work Surface and turn counterclockwise
(CCW) to unlock the Work Surface
(Figure 1)
.
2. Lift the Work Surface upwards to access the interior of the main bin.
3. Place a laptop (not provided) carefully inside the main bin and plug the power cord into the supplied power bar.
Adjust the height and fit with the supplied bumpers as needed (see page 2 for size restrictions).
4. Plug all USB cables into the laptop.
NOTE:
A USB HUB (NOT PROVIDED) MAY BE REQUIRED.
5. To close, lower the Work Surface until it is resting on the main bin and turn the key clockwise (CW) to lock.
NOTE:
WITH THE SPRING-LOADED BUMPER ON THE INSIDE OF THE WORK SURFACE, IT MAY BE NECESSARY
TO PRESS DOWN ON THE WORK SURFACE WHILE LOCKING.
WARNING:
ENSURE THE KEY IS TURNED COUNTERCLOCKWISE BEFORE ATTEMPTING TO CLOSE THE WORK
SURFACE. FAILURE TO DO SO COULD LEAD TO DAMAGE TO THE WORK SURFACE AND/OR LOCKING MECHANISM.
NOTE:
REFER TO THE LAPTOP BUMPER INSTALLATION MANUAL FOR MORE DETAILED INSTRUCTIONS.
Section 5: Device Installation
Figure 2
Figure 3
Figure 4
Figure 1
DESCRIPTION:
PART NO:
SCALE:
DRAWN BY:
CHECKED BY:
SHT.
OF
DRAWING NO:
NTS
DATE:
DATE:
PROJECTION
www.amico.com
Work Surface Lock
Main Bin
Unlock
Lock
Open
Close
