23
Amico Accessories Inc.
Automatic Height Adjustment Standard Interface
1. Initialize the cart by briefly plugging it into a power outlet. AC Power Indicator (shown previously) should illuminate
(may take up to 30 seconds).
NOTE:
AFTER INITIALIZING THE CART, THE UP/DOWN TOUCH BUTTONS WILL BEGIN TO FLASH, INDICATING
THAT THE USER MUST SET THE CART’S HOME (LOWEST) POSITION.
2. To set the Home Position, hold the Down Touch Button to lower the cart’s Work Surface until only the down arrow is
flashing (this indicates the cart is in “collision” and cannot continue to move downward).
3. Release the Down Touch Button and reverse direction to raise Work Surface to desired position.
4. To adjust position, hold the Up Touch Button to move up or the Down Touch Button to move down.
NOTE:
AT IDEAL OPERATING HEIGHT, THE OPERATOR’S FOREARMS SHOULD BE PARALLEL TO THE FLOOR WHEN
USING THE KEYBOARD/MOUSE (90° BEND AT ELBOWS).
Section 6: Adjustments
Standard Interface
Work Surface
Battery Level
E
F
1/2
1/4
3/4
Recovery
Standard Interface
Up/Down Touch Buttons
