A01-00159 Rev B
5
1.0 GENERAL SAFETY INSTRUCTIONS
Please comply with all warnings and operating instructions in this manual
strictly. Save this manual properly and carefully read the following
instructions before installing the unit. Do not operate this unit before
reading through all safety information and operating instructions carefully.
1.1. Transportation
Please transport the UPS system only in the original package to
protect against shock and impact.
1.2. Preparation
•
Condensation may occur if the UPS system is moved directly
from cold to warm environment. The UPS system must be
absolutely dry before being installed. Please allow at least two
hours for the UPS system to acclimate the environment.
•
Do not install the UPS system near water or in moist environments.
•
Do not install the UPS system where it would be exposed to
direct sunlight or near heater.
•
Do not block ventilation holes in the UPS housing.
1.3. Installation
•
Do not connect appliances or devices which would overload
the UPS system (e.g. laser printers) to the UPS output sockets.
•
Place cables in such a way that no one can step on or trip
over them.
•
Do not connect domestic appliances such as hair dryers to
UPS output sockets.
•
The UPS can be operated by any individuals with no
previous experience.
•
Connect the UPS system only to an earthed shockproof
outlet which must be easily accessible and close to the UPS
system.