A01-00159 Rev B
19
FU
Bypass frequency unstable
BR
Battery Replace
EE
EEPROM error
3.5 UPS Setting
Parameter 1
Parameter 2
There are three parameters to set up the
UPS.
Parameter 1: It is for program alternatives.
Refer to below table.
Parameter 2 is the setting options or values
for each program.
01: Output voltage setting
Interface
Setting
Parameter 2: Output voltage
For 100/110/115/120/127 VAC models, you
may choose the following output voltage:
100:
presents output voltage is 100Vac
110:
presents output voltage is 110Vac
115:
presents output voltage is 115Vac
120:
presents output voltage is 120Vac
(Default)
127:
presents output voltage is 127Vac
02: Frequency Converter enable/disable
Interface
Setting
Parameter 2:
Enable or disable converter
mode. You may choose the following two
options:
CF ENA:
converter mode enabled
CF DIS:
converter mode disabled (Default)
