Ametek PCD 8 S Series, Manual

Page: 6 / 53

AMETEK CTS PCD 8 s-series
Operating Manual V 2.02 6 / 53
1.3. Product return procedure
1. Request a Return Material Authorization (RMA) number from the local AMETEK CTS representative
2. When requesting an RMA, have the following information ready:
- Model number
- Serial number
- Description of the problem
NOTE:
Unauthorized returns will not be accepted and will be returned at the shipper’s expense.
NOTE: A returned product found upon inspection by AMETEK CTS, to be in specification is subject to an
evaluation fee and applicable freight charges.
1.4. Recycling and Disposal
1.4.1. RoHS directive 2011/65/EU (RoHS 2)
RoHS directive 2011/65/EU (RoHS 2)
The AMETEK CTS PCD 8 s-series complies with the directive 2011/65/EU (RoHS - Restriction of certain
Hazardous Substances).
From December 2005, all AMETEK CTS products either hand soldered or by machine are produced using lead-
free solder.
1.4.2. WEEE directive 2012/19/EU
The AMETEK CTS PCD 8 s-series couplers are dedicated under category 9 in the directive 2012/19/EU (WEEE).
The product should be recycled through a professional organization with appropriate experience for the disposal
and recycling of electronic products. AMETEK CTS is also available to help with questions relating to the
recycling of this equipment.
1.4.3. Dismantling information
Always remove power cord first. There is no special danger involved in dismantling the PCD 8 s-series.
1.4.4. Parts which can be recycled
The PCD series couplers contains parts made from steel, aluminum, PVC, two-component sealing compound.
The impulse capacitors are filled with non-poisonous mineral oil. The various parts can be separated and
recycled.
1.4.5. Parts which cannot be recycled
All parts in the PCD 8 s-series can be recycled.