Ametek PCD 8 S Series, Manual

Page: 23 / 53

AMETEK CTS PCD 8 s-series
Operating Manual V 2.02 23 / 53
5. PCD 8 s-3-690-1000-100/200
5.1. Input PCD 8 s-3-690-1000-100/200
Figure 5.2: Input coupling PCD 8 s-3-690-1000-200
1 Decoupling network L1-N
2 Decoupling network L3-L2
3 Sync unit
4 Surge coupling box (SCB)
5 Cooling fans (200 A-models only)
6 Power supply input L1-N / DC+-DC-
7 Power supply input L3-L2
8 Earth rail (PE)
9 Surge generator synch. input
10 Jumper for capacitance setting (Jc)
11 HV-high input from Surge generator
12 Jumper for impedance setting (Ji)
1 Decoupling network L1-N
Surge decoupling network, L1-N
.
2 Decoupling network L3-L2
Surge decoupling network L3-L2
.
3 Sync unit
For synchronisation purpose the synchronisation unit needs to be connected to the decoupling units 1 and 2
(also see 9).
4 Surge coupling box (SCB)
Surge coupling box for IEC coupling L-L and L-PE. An additional SCB is required for ANSI and optional IEC
coupling (in combination with the SCB included in delivery).
5 Cooling fans (200 A-models only)
For operation, the fan motors must be connected to the power supply units supplied, there is no separate on/off
switch for this purpose
.
6 Power supply input L1-N / DC+-DC-
Input screw terminal L1(DC+) and N(DC-). Max. voltage 3 * 690 V AC, 1.000 V DC
.