Ametek PCD 8 S Series, Manual

Page: 5 / 53

AMETEK CTS PCD 8 s-series
Operating Manual V 2.02 5 / 53
1. General
The following manual is based on the following product family:
- coupling NX family
1.1. Purpose
The coupling networks from PCD 8 s-series are coupling networks for coupling Surge impulses to high voltage &
current supply lines. Its couples conducted electromagnetic interference effects for immunity testing to a test
equipment according international, national, and manufacturers
’ standards.
The system is designed for full compliance conducted electromagnetic compatibility (EMC) test requirements.
The application range is for testing of industrial, light industrial, household, or commercial equipment, including
many product family and product standards as per following basic standard:
- IEC 61000-4-5 Surge
1.2. Warranty Terms
AMETEK CTS provides this written warranty covering the product stated above, and if the buyer discovers and
notifies AMETEK CTS in writing of any defect in material or workmanship within the applicable warranty period
stated above, then AMETEK CTS may, at its option: repair or replace the product; or issue a credit note for the
defective product; or provide the buyer with replacement parts for the product.
The buyer will, at its expense, return the defective product or parts thereof to AMETEK CTS in accordance with
the return procedure specified below. AMETEK CTS will, at its expense, deliver the repaired or replaced product
or parts to the buyer. Any warranty of AMETEK CTS will not apply if the buyer is in default under the purchase
order agreement or where the product or any part thereof:
•
is damaged by misuse, accident, negligence or failure to maintain the same as specified or required by
AMETEK CTS;
•
is damaged by modifications, alterations or attachments thereto which are not authorized by AMETEK
CTS;
•
is installed or operated contrary to the instructions of AMETEK CTS;
•
is opened, modified, or disassembled in any way without
AMETEK CTS’s consent; or
•
is used in combination with items, articles or materials not authorized by AMETEK CTS.
The Buyer may not assert any claim that the products are not in conformity with any warranty until the buyer has
made all payments to AMETEK CTS provided for in the purchase order agreement.