Ametek PCD 8 S Series, Manual

Page: 19 / 53

AMETEK CTS PCD 8 s-series
Operating Manual V 2.02 19 / 53
Then select your PCD from the list. If you are using both the 100
and 200 A version, please ensure that both PCDs are selected
(one after the other).
3.3.2. Selecting the PCD 8 s in test-mode (compact NX)
To be able to select the PCD 8 s for coupling, it must first be activated as an external coupler as shown in
chapter 3.3.1. The PCD 8 s can then be selected as a coupling network in the various test menus.
Example Quickstart: In the lower left corner of the test window
you can see which coupling network is currently selected (1).
Open the coupling setting menu (2).
Change the coupling mode from Internal to the PCD 8 s (3) to be
used and press OK (4).
In the lower left corner of the test window you can see now the
selected PCD 8 s.
Example PCD 8 s-3-690-1000-100