Ametek PCD 8 S Series, Manual

Page: 50 / 53

AMETEK CTS PCD 8 s-series
Operating Manual V 2.02 50 / 53
12. Appendix
12.1. Declaration of CE-Conformity
12.1.1. Declaration of CE-Conformity coupling Network coupling PCD 8 s-3-690-1000-100
Manufacturer:
AMETEK CTS GmbH
Address: Sternenhofstr. 15
CH 4153 Reinach
Switzerland
Declares, that under is sole responsibility, the
product’s listed below, including all their options, are conformity with
the applicable CE directives listed below using the relevant section of the following EC standards and other normative
documents.
Product‘s name:
Manual coupling Network for high AC/DC current
Model Number(s) PCD 8 s-3-690-1000-100
Low Voltage Directive 2014/35/EU
Standard to which conformity is declared:
EN 61010-1:2011 Safety requirements for electrical equipment for measurement, control, and
laboratory use.
EMC Directive 2014/30/EU
Standard(s) to which conformity is declared:
EN 61326-1:2013 Electrical equipment for measurement, control, and laboratory use
(Requirements for devices to use in industrial area.)
EN 61000-3-2:2014 Limits for harmonic current emissions
EN 61000-3-3:2013 Limitation of voltage changes, voltage fluctuations and flicker in public low-
voltage supply systems.
The purpose of this instrument is the generation of defined interferences signals for EMI immunity testing.
Depending on the arrangement of the test rig, the configuration, the cabling, and the properties of the EUT itself,
a significant amount of electromagnetic radiation may result that could also affect other equipment and systems.
The user himself or herself is ultimately responsible for the correct and controlled operation of the rig. In case of
doubt, the tests should be carried out in a Faraday cage.
Manufacturer
AMETEK CTS GmbH
Sternenhofstr. 15
CH 4153 Reinach
Phone: +41 61 204 41 11
Fax: +41 61 204 41 00
By A. Burger
Director Engineering AMETEK CTS
Place Reinach BL, Switzerland
Date 01. November 2020