Ametek Elgar ReFlex Power, Operation Manual

Page: 51 / 359

Mainframe ReFlex Power™
2-16 M380056-01 Rev L
Table 2-2. Module Backplane Slot Connections
Module Model Width
Number
of Slots
Occupied
Slot Supplying
Input Power
Maximum Input
Current
(at 103.5VAC and
full load)
RFP-C1LAN-000-xxxx single 1 single 0.2A
RFP-F1000-001-xxxx single 1 single 2.8A
RFP-D1016-021-xxxx
RFP-D1065-5A1-xxxx
single 1 single 4A
RFP-D2033-030-xxxx
RFP-D2050-020-xxxx
RFP-D2050-025-xxxx
RFP-D2120-8A3-xxxx
RFP-D2450-2A3-xxxx
double 2 right-most 12A
RFP-A30XK-875-xxxx triple 3 right-most 12A
RFP-L3500-750-xxxx
RFP-L3500-375-xxxx
triple 3 right-most 1.1A
The maximum output power per single group of four slots is produced when two
HPDC 1kW modules are installed in the group. This sets the maximum
aggregate output power limit of the Mainframe at 6kW. The resultant maximum
current per input connector line and per input service line is presented in Table
2-3. In general, to determine the actual input currents, the current requirements
of the modules that are installed in each group must be summed. This would
determine the requirement for the AC/DC input overcurrent protection current
rating.