Ametek Elgar ReFlex Power, Operation Manual

Page: 278 / 359

ReFlex Power™ Active Loads
M380056-01 Rev L 7-3
•
Web server
•
Optional Isolated Remote Analog Control, uses 16 bit digital interface
•
Integral Active Damper (for stable operation with inductive sources)
•
Surge power SOA protection envelope
7.2.2
ACCESSORIES LIST
The ReFlex Power™ Load modules include the following standard accessories:
•
Operation Manual, P/N M380056-01 (this manual)
•
Programming Manual, P/N M380056-03Quick Reference Guide, P/N M380056-
04
7.2.3
CONTROLS AND INDICATORS
The Active Load modules operate within the ReFlex Power™ system as part of
an automated test system, so there are no user manual controls. They rely on
the Mainframe and Controller module for control, status and data
communications, and for input/output connections to the user application. All
input source connections and discrete control interface to the user application are
accessible on the front panel of the modules (Figure 7-1 and Figure 7-2). Also,
the front panel has LEDs to indicate the module’s operational state. Input power
is routed from the Mainframe through a backplane distribution (see Figure 7-3 for
a view of the module rear panel connector interface).