Ametek Elgar ReFlex Power, Operation Manual

Page: 240 / 359

ReFlex Power™ DC Power Supplies
M380056-01 Rev L 6-37
Table 6-8. RFP-D1016-021-XXXX DC Output Connector Pinout
PIN NAME FUNCTION SIGNAL LEVEL
WIRE
GAUGE,
AWG
MAX. WIRE
LENGTH, FT
A1 OUT
Output: module output source;
connected to A3 ±16V; ±200V, maximum
to chassis
10
100, for 1.5V line
drop at 10.3A
A2 OUT-RTN
Output: return for output source,
OUT; connected to A4 ±16V; ±200V, maximum
to chassis
10
100, for 1.5V line
drop at 10.3A
A3 OUT
Output: module output source;
connected to A1 ±16V; ±200V, maximum
to chassis
10
100, for 1.5V line
drop at 10.3A
A4 OUT-RTN
Output: return for output source,
OUT; connected to A2 ±16V; ±200V, maximum
to chassis
10
100, for 1.5V line
drop at 10.3A
1 SNS
Input: remote sense connection for
OUT ±16V; ±200V, maximum
to chassis
20 100
5 SNS-RTN
Input: remote sense connection for
OUT-RTN ±16V; ±200V, maximum
to chassis
20 100
4 CHAS-GND Shield ground Chassis ground 20 100
A5, A6,
2,3,6,7
- Reserved - - -
DC O
UTPUT
C
ONNECTOR
A
CCESSORIES
•
AMETEK P/N 5380444-01, LPDC 16V Module, 9ft. Unterminated DC Output Cable Assembly.
•
AMETEK P/N 5380444-03, LPDC 16V Module, Right Angle, 9ft. Unterminated DC Output Cable
Assembly.
RFP-D1065-5A1-XXXX DC O
UTPUT
C
ONNECTOR
:
Connector: Positronic Industries P/N CBD13W6M2000Z, AMETEK P/N 856-214-07
Pins A1-A6: Positronic Industries P/N MS4820D*, -50, AMETEK P/N 856-745-53
Backshell: Positronic Industries P/N D37000Z00, AMETEK P/N 856-247-39
Wire size: Maximum gauge 20 AWG (recommended) (see table for length)
Figure 6-12. RFP-D1065-5A1-XXXX DC Output Connector, Front Panel View, and Wiring Diagram