Ametek DMS-3K, Installation & Operation Manual

Page: 112 / 206

100
The Event Log format consists of a Date and Time of the event, a Descriptor that identifies the type of
event, the Station ID and Device ID identifying where the Alarm came from, Point Number for the
alarm and Event Description which is configured for every input. Any of these fields can be sorted by
selecting the field description. Selecting it again will do a reverse sort.
The different types of events are identified with a descriptor as shown in the table below.
Event Types Event
Descriptor Event Description
Alarm Event A
N
Input goes into the Alarm State
Input Returns to Normal State
Diagnostic Event D System Diagnostic for:
-Unit Configuration
-Disabled Alarms (Manual or Automatically)
-Acknowledged Alarms
-System Watchdog Faults
Refer to Appendix I for a complete list of diagnostic
events
Time Event T Event associated with Time Clock
-Time Sync enabled
-Time sync lost
-Time Reset